Lightweigt office partitions are the best solution for the separation of jobs and planning facilities. The modules MDF profiles are manufactured and covered with paint or veneered. Modules can be used with melamine filling, veneered panels, fabric covered panels or a variety of lenses. All fillings can be freely combined with each other. Lightweigt office partitions modules are easy to move around independently if needed.

The modules are manufactured of plywood or MDF profiles measuring 30x60mm

Profiles

Lightweigt office partition profiles, modules, and the poles are made of a framework of plywood or MDF profiles.

Glazing and panels

Glasses will be mounted in the profile with special seals.
Bulkhead modules can be used as filler in various ways:
Glass (clear, tinted, opacified, toughened, laminated, etc.).
PVC plates
Melamine, MDF and veneered panels
Cloth-covered panels
Panels
Specific (for example wire net, bars, etc..)

To the modules there are possibility to attach different blinds, ropes, etc..

Surface
Lightweigt office partitions profiles, doors and panels can be:

Leave with natural finish
To paint (RAL, NCS and Monicolor Nova catalog)
Veneers (natural veneer types)
Cover with special oils

Installation

Lightweigt office partitions will be installed in modules, which makes their handling quick and easy. Seals between the modules are soundproof. There are possibility to attach lightweigt office partitions to plaster, concrete, wood or false ceiling. Also we could include electric cable boxes to the bottom of modules. To finish the installation we use edge profiles and silicone.

Standard measures for lightweigt office partitions:

h = 1300
l = 1200, 1000, 800, 600, 400 mm

h = 1700
l = 1200, 1000, 800, 600, 400 mm

h = 2100
l = 1200, 1000, 800, 600, 400 mm